La Marzocco Linea PB, Руководство пользователя

Страница: 12 / 112

EN
12
6) Waste water drain connection
The espresso machine drain is to be
connected by means of the included
reinforced plastic tubing. Connect one end
of the reinforced plastic tubing to the drain
hose connection on the left side of the
espresso machine, secure with included
hose clamp. Connect the other end to a
suitable waste water collection system.
In case such a system is not available,
drained liquids may be collected in a
suitable bucket and any necessary drain
pipe extensions shall be made using steel-
lined PVC tubing and suitable hose clamps.
WARNING
REPLACE FUSES WITH THE SAME SIZE, TYPE AND RAT-
ING F1 = 2A, 250V
WARNING
- U.S.A. AND CANADA ONLY -
DO NOT CONNECT TO A CIRCUIT OPERATING AT MORE
THAN 150V TO GROUND ON EACH LEG.
WARNING
THE MANUFACTURER DECLINES ANY RESPONSIBILITY
FOR ANY EVENT LEADING TO LIABILITY SUITS WHENEVER
GROUNDING HAS NOT BEEN COMPLETED ACCORDING
TO CURRENT LOCAL, NATIONAL, AND INTERNATIONAL
REGULATIONS AND ELECTRICAL CODES,
OR OTHER ELECTRICAL PARTS HAVE BEEN
CONNECTED IMPROPERLY.
Water specifications table
Min. Max.
T.D.S. ppm 90 150
Total Hardness ppm 70 100
Total Iron (Fe
+2
/Fe
+3
) ppm 0 0,02
Free Chlorine (Cl
2
) ppm 0 0,05
Total Chlorine (Cl
2
) ppm 0 0,1
pH value 6,5 8,5
Alkalinity ppm 40 80
Chloride (Cl
–
) ppm not more 50
N.B.: Test water quality (the warranty is void if water parameters are not within the range
specified in the section “installation”)