La Marzocco Linea PB, Руководство пользователя

Страница: 9 / 112

EN
9
435 mm
17 in.
230 mm
9 in.
100 mm
4 in.
HERE THE POSITION
OF THE DRAIN TUBE
164 mm
6,5 in.
87 mm
3,5 in.
92 mm
3,5 in.
165 mm
6,5 in.
HERE THE POSITION OF THE POWER CORD AND
WATER INLET HOSES
FROM ∅ 100 TO ∅ 120 mm
FROM ∅ 4 in. TO ∅ 4,7 in.
HERE THE POSITION WHERE WE
SUGGEST TO MAKE THE HOLE
ON THE TABLE
70 mm
2,7 in.
23 mm
1 in.
438 mm
17,2 in.
POSITION OF THE HIGH LEGS MACHINE
570mm (2 groups)
22,5 in. (2 groups)
810 mm (3 groups)
32 in. (3 groups)
1050 mm (4 groups)
41,5 in. (4 groups)
2) Accessories
Check the package to make sure that the
following accessories are included:
• a number of 1-dose and 2-dose portafilters
orresponding to the number of groups;
• replacement 1-dose and 2-dose filters
(one of each);
• 1 tamper;
• 1 blind filter;
• cleaning detergent, for the groups;
• 3 stainless steel braided hoses for water
connections;
• 1,5 mt of reinforced plastic tubing for
drainage;
• 1 hose clamp.
In order to proceed with installation, it is
necessary that the following are available:
• Pipes carrying drinking water with a
3/8”G (BSP) end connection; (3/8”
Compression for USA and Canada)
• Electrical Supply according to the
specification of the espresso machine
purchased:
• Single/Three phase 220VAC - 50/60
Hz electrical connection with ground,
protected socket and approved interlock
switch
WARNING
AT EACH INSTALLATION, THE MACHINE
SHOULD BE EQUIPPED WITH A NEW SET OF
TUBES FOR PLUMBING AND RELATED GASKETS.
1) Installation on the counter
The image below shows the recommended method to drill the hole on the counter.
Fig. 4 - Hole on the Counter
WARNING
IN ORDER TO PREVENT CRACKS OR LEAKAGE:
DO NOT STORE OR INSTALL THE COFFEE
MACHINE IN PLACES WHERE TEMPERATURE
MAY CAUSE WATER IN BOILER OR
HYDRAULICSYSTEM TO FREEZE.