background image

EN

41

Display

Operating Procedure

Description

Programming Mode

(only on AV and ABR espresso machine models) 

“Barista” Programming

Except for the first group, you can set the function  USE GROUP 1 for each key. 
This option allows to use the corresponding dose of the first group instead of setting it. 

The setting of the first group is automatically copied to the subsequent groups. 

Press the button T3 

 to exit the submenu.

Press the T3 button 

 to return to the doses programming.

Press T1 

 or T2 

 to continue with the programming of the other parameters.

Press T2 

 and T3 

 at the same time to exit the programming mode and return to the normal use of the 

espresso machine.

•  This  parameter  allows  the  operator  to 

view and manually change each dose for 
each key.

•  For greater accuracy and consistency of 

the doses, it is recommended that you 
set each key.

•  The  dose  can  be  set  by  pulses  or  by 

mass (weight).

G1 Dose

Settings

Program Dose

Exit

Group 1

Group Dose

Exit

LaMarzocco 00:00

CB 93.8

°

C SB

8

9

7

6

Содержание Linea PB

















































































































Отзывы: