La Marzocco kb90 Series, Руководство пользователя

Страница: 13 / 144

EN
13
HERE THE POSITION WHERE WE
SUGGEST TO MAKE THE HOLE
ON THE TABLE
55 mm
2,2 in.
POSITION OF THE HIGH LEGS MACHINE
565mm (2 groups)
22,2 in. (2 groups) 805 mm (3 groups)
31,7 in. (3 groups)
78 mm
3 in.
412 mm
16,2 in.
160 mm
6,3 in.
217 mm
8,5 in.
135 mm
5,3 in.
400 mm
15,7 in.
250 mm
9,8 in.
123 mm
4,8 in.
318 mm
12,5 in.
HERE THE POSITION
OF THE DRAIN TUBE
FROM ∅ 100 TO ∅ 120 mm
FROM ∅ 4 in. TO ∅ 4,7 in.
HERE THE POSITION OF THE POWER CORD AND
WATER INLET HOSES
2) Accessories
Check the package to make sure that the
following accessories are included:
• a number of 1-dose and 2-dose portafilters
orresponding to the number of groups;
• replacement 1-dose and 2-dose filters
(one of each);
• 1 tamper;
• 1 blind filter;
• cleaning detergent, for the groups;
• 3 stainless steel braided hoses for water
connections;
• 1,5 mt of reinforced plastic tubing for
drainage;
• 1 hose clamp.
In order to proceed with installation, it is
necessary that the following are available:
• Pipes carrying drinking water with a
3/8”G (BSP) end connection; (3/8”
Compression for USA and Canada)
• Electrical Supply according to the
specification of the espresso machine
purchased:
• Single/Three phase 220VAC - 50/60
Hz electrical connection with ground,
protected socket and approved interlock
switch
• Single phase 200VAC - 50/60 Hz
electrical connection with ground,
protected socket and approved interlock
switch
1) Installation on the counter
The image below shows the recommended method to drill the hole on the counter.
Fig. 4 - Hole on the Counter