63
EN
Programming Mode
Description
Operating Procedure
Display
1
L a Ma r z o c c o 0 9: 3 0
2
3
4
Turn off the main-switch (O position/ Off position)
Press and hold the
button and turn on the main switch (1 position/On postion) until the following is
displayed (approximately 10 seconds):
Press the irst
or the second
button from the left to change the temperature on the displayed
boiler. The measured temperature appears on the left and the set temperature appears on the right side of
the display. Once the desired temperature is selected press the
button to conirm the selection and go
through the menu.
When inished, scroll through the OFF parameter with the
button and push any
button
Boiler Parameters
• This parameter is set at the factory at a
preset nominal temperature.
• The set temperature of this parameter
differs from the actual temperature of
the water exiting the group to the coffee.
• To set the temperature of any espresso
machine it is important to measure the
temperature of the water exiting the
group.
(Barista Programming Example)
Nominal Coffee Boiler
Temperature
Co f f e e Boi l e r 1
2 0 2. 5 C 2 0 2. 6 C
Cof f ee Boi l er 1
2 0 2. 5 C 2 0 2. 6 C
