EN
33
Display
Operating Procedure
Description
Programming Mode
1
L a Ma r z o c c o 0 9: 3 0
2
3
4
5
6
7
Press and hold the
button on the group 1 keypad until the following is displayed (approximately 10
seconds):
Enter the 5 digit technician password using buttons 1-5 on the group 1 keypad. Once accepted the following
appears:
Press and hold the
button on the group 1 keypad until the following appears:
Press the
button on the group 1 keypad one time and the following appears:
Press the
or the
button to adjust the temperature higher or lower. Each block is equal to 0.9°F
(0.5°C). Once the desired setting is made press the button
to conirm and advance to the next boiler (if
available).
Repeat procedure 5 for all subsequent boilers.
When inished, continue to the next parameter
or press
to exit programming mode.
“Technical” Programming
• This parameter allows the technician to
adjust the temperature of the individual
coffee boilers.
• This procedure is best completed with
an external temperature measuring
device that measures the water exiting
the group at the point of contact with
the coffee.
Temperature Correction
Temp. c o r r ec t i o n
Temper at u r es
Pa s s wo r d
? ? ? ? ?
La n g u a g e
ENGLI SH
Te mp. c o r r e c t i o n
Te mp e r a t u r e s
Co f f e e Boi l e r 1
