EN
10
-
Cable tightening;
6) Waste water drain connection
The espresso machine drain is to be
connected by means of the included
reinforced plastic tubing. Connect one end
of the reinforced plastic tubing to the drain
hose connection on the left side of the
espresso machine, secure with included
hose clamp. Connect the other end to a
suitable waste water collection system.
In case such a system is not available,
drained liquids may be collected in a
suitable bucket. Any necessary drain pipe
extensions should be the same tubing
speciications of what supplied with the
machine when purchased and suitable
hose clamps.
WARNING
THE MANUFACTURER DECLINES ANY RESPONSIBILITY
FOR ANY EVENT LEADING TO LIABILITY SUITS
WHENEVER GROUNDING HAS NOT BEEN COMPLETED
ACCORDING TO CURRENT LOCAL, NATIONAL, AND
INTERNATIONAL REGULATIONS AND ELECTRICAL
CODES, OR OTHER ELECTRICAL PARTS HAVE BEEN
CONNECTED IMPROPERLY.
WARNING
- U.S.A. AND CANADA ONLY -
DO NOT CONNECT TO A CIRCUIT OPERATING AT MORE
THAN 150V TO GROUND ON EACH LEG.
ATTENZIONE
REPLACE FUSES WITH THE SAME SIZE, TYPE AND
RATING F1 = 2A, 250V
Water speciications table
Min.
Max.
T.D.S.
ppm
90
150
Total Hardness
ppm
70
100
Total Iron (Fe
+2
/Fe
+3
)
ppm
0
0,02
Free Chlorine (Cl
2
)
ppm
0
0,05
Total Chlorine (Cl
2
)
ppm
0
0,1
pH
value
6,5
8,5
Alkalinity
ppm
40
80
Chloride (Cl
–
)
ppm
not more
50
N.B.:
Test water quality (the warranty is void if water parameters are not within the range
speciied in the section “installation”)
