EN
28
Display
Operating Procedure
Description
1
L a Ma r z o c c o 0 9: 3 0
2
3
4
Press and hold the
button on the group 1 keypad until the following is displayed (approximately 5
seconds):
Press the
button on the group 1 keypad until the following appears:
Press the
or the
button to change to
ON
or
OFF
. Once the desired condition is displayed press the
button to conirm.
When inished, continue to the next parameter
or press
to exit programming mode.
“Barista” Programming
• This parameter allows the user to enable
or disable the cup heating routine.
• The cup heater is an option ordered from
the factory, not available in the USA &
Canada.
• Additional parameter settings are
available in the factory level parameters
under Cup Heating Times.
Cup Heating
Cu p h eat i ng
OFF
Wa t e r Vol u me
Pr o g r a mmi n g
Cu p h e a t i n g
OFF
