La Germania AMS95C81ANE/20, Инструкция по установке, обслуживанию и эксплуатации

Страница: 9 / 44

9
Holding Function
The holding function keeps the temperature of the bottoms of pans at about 65°C. This allows foods to be kept hot with optimal
energy consumption and to be heated gently. The holding function can be kept in operation for up to 2 hours.
The holding function is and is indicated by the relevant symbols on the cooking zones.
HOB
ATTENTION:
Metal items such as cutlery or lids must never be placed on the surface of the hob since they may become hot.
Cooking zones (fig.26)
The appliance is equipped with 5 cooking zones having different diameters and powers. Their positions are clearly marked by
rings, while the heating power is only released in the area shown on the ceramic hob. The 5 cooking zones are of HIGH-LlGHT
type and start to heat up a few seconds after they are switched on. The heat level of each zone can be regulated from the
minimum to the maximum setting using the knobs on the front panel.
Underneath each cooking zone there is a coil called an
inductor, supplied with power by an electronic system, which generates
a variable magnetic field. When a pan is placed inside this magnetic field, the high frequency currents concentrate directly on
the bottom of the pan and produce the heat needed to cook the foods.
The 5 lights between the cooking zones come on when the temperature of one or more cooking zones exceeds 60° C.. The
lights go out when the temperature drops to below about 60° C.
Zone number: Power absorption
Normal operation: With power function:
1 1100W 1400W
2 1100W 1400W
3 1400W 2000W
4 2300W 3000W
5 2300W 3000W
Total power absorption 7400W
When the hob is used for the first time, it should be heated to its maximum temperature for long enough to bum off any oily
residues left by the manufacturing process, which might contaminate foods with unpleasant smells.
TYPES OF PANS
This type of appliance can only operate with pans of special kinds.
The bottom of the pan must be iron or steel/iron to generate the magnetic field necessary for the heating process.
Vessels made from the following materials are not suitable:
•
glass;
•
porcelain;
•
pottery;
•
steel, aluminium or copper without magnetic bottom;
To check that a pan is suitable, simply place a magnet close to its bottom:
if the magnet is attracted, the pan is suitable for induction cooking. If no magnet is to hand, put a little water in the pan, place it
on a cooking zone and switch it on. If the symbol appears on the display instead of the power, the pan is not suitable.
The pans used for cooking must have certain minimum diameters to ensure satisfactory operation.
Pans larger than the cooking zones can also be used, but it is important to ensure that the bottom of the pan does not touch
other cooking zones, and that it is always centred over the perimeter of the cooking zone.(fig.27-28).
Use only vessels specially designed for induction cooking, with thick, completely flat bottom; if these are not available, the pans
used must not have crowned (concave or convex) bottom. (fig.29)
Pan present device
Each cooking zone is equipped with a "pan present" device, which ensures that cooking cannot start unless a suitable pan is
present on the cooking zone and properly positioned.
If the user attempts to switch on the cooking zone with the pan not positioned properly or with a pan which is not of suitable
material, a few seconds after the zone is switched on the symbol will appear to warn the user that an error has been made.
Residual heat
Each cooking zone is equipped with a device which warns of residual heat. After any cooking zone is switched off,
a flashing ‘H’
may appear on the display. This warns that the cooking zone concerned is still very hot. Cooking can be restarted while the
‘H’
is flashing; proceed as described in point "3".
Locking-out the hob
When not in use, the hob can be "Iocked out" to prevent children from accidentally switching it on.
With the cooking zones off
, turn the knobs of zones 2 and 4 to the left simultaneously until 5 Ls appear on the power display and
then release the knobs.
To deactivate it, repeat the same procedure: the cooking zone displays will all show 0, indicating that the cooking zone lock-out
function has been deactivated.
Attention: Take care not to spill sugar or sweet mixtures onto the hob during cooking, or to place materials or substances which
might melt (plastic or aluminium foil) on it; if this should occur, to avoid damage to the surface, turn the heating off immediately
and clean with the scraper supplied while the cooking zone is still warm. If the ceramic hob is not cleaned immediately, residues
may form which cannot be removed once the hob has cooled.
Important!
Keep a close eye on children because they are unlikely to see the residual heat warning lights. The cooking zones are still very
hot for some time after use, even if they are switched off. Make sure that children never touch them.