English
English
5.2 Selection Programming – Cappuccino
Press one of the cappuccino
dispensing keys (the associated
led will remain lit and not flash).
This message will be displayed:
Selection xx
1 Capp. MM2
Water dose
100
Coffee dose 2,0
To vary the water dose (fan pulses) use keys “+” and “-“ (
30
).
To vary the coffee dose (grinding time) first press key “
” (
31
)
then move the flashing cursor (arrow) to the bottom line, then press
keys “+” and “-“ (
30
).
When key “
” (
31
) is pressed again, the line “Milk time” will be
displayed (highlighted by a flashing cursor). Press keys “+” and “-“
(
30
) to change the parameter.
5.3 Selection Programming – Hot Water
Press one of the hot water
dispensing keys. This message
will be displayed:
Selection xx
Water
Time water
10,0
To vary the water dose (dispensing time) use keys “+” and “-“ (
30
).
6. Start-End Operations Programming
The following is displayed:
Time ON 3:00
Time OFF 3:00
Closing day
None
To change the ON time use keys “+” and “-“ (
30
).
To change the OFF time first press key “
” (
31
) then move the
flashing cursor (arrow) to the bottom line, then press keys “+” and “-
“ (
30
).
When key “
” (
31
) is pressed again, the flashing cursor will
position itself on the closing day (None). Press keys “+” and “-“ (
30
)
to change this parameter (Monday, Tuesday, etc.).
N.B. If the automatic ON/OFF function is not required and the machine
is to be switched on manually, set “Time ON” and “Time OFF” to the
same time.
