12
12
8
1
3
2
4
5
A
English
28 EN
FILTER-HOLDERS -
7KLVRSHUDWLRQPXVWEHPDGHRQDOOWKH¿OWHUKROGHUVDWWKHHQGRIHDFKZRUNLQJGD\
Keep a hot water distributor key (
12
) pressed down for
approximately 5 seconds.
The following message will be displayed: “
WATER
CHANGE
”. The water from the boiler will drain from the
hot water nozzle (
8
) (60 - 70% ca. of the total capacity).
Dispensing will stop automatically.
After the procedure, the machine will return to its normal
IXQFWLRQVDQGWKHERLOHUZLOOEHUH¿OOHGZLWKIUHVFKZDWHU
Put a liter of cold water in a
suitable container and add
detergent.
5HPRYHWKH¿OWHUVIURPWKH¿OWHUKROGHUV
6RDNWKH¿OWHUVDQGWKH¿OWHU
holders in this solution for
about 15 minutes.
Remove any residue with a sponge and rinse well with
cold water.
3ODFHWKH¿OWHUVEDFNLQWKH¿OWHUKROGHUPDNLQJVXUHWKDW
the anchoring spring (
A
RIWKH¿OWHULVLQLWVVORW
When the machine is blocked, a warning message appears
on the display: if the key corresponding to the requested
wash cycle is pressed (key
26
) and the instructions on
the display are followed, the wash cycle is performed and
the machine is no longer blocked.
For example, if there is a "coffee block", the following
message appears on the display:
The number of the "blocked group" blinks on the display
and depends upon the number of machine groups.
If the coffee wash circuit key
(
26
) is pressed, the previous
message will be integrated as shown:
When the "INSERT FILTER HOLDER - GROUP 1" message
appears, the block message for Group 1 disappears. The
block messages for groups still to be washed appear in
alternation.
At this point, follow the steps on the previous pages for
the wash cycle.
Block function
GROUP 1 LOCKED
EXECUTE WASHING
INSERT FILTER HOLDER
GROUP 1
CHANGING THE WATER IN THE BOILER
- Procedure to carry out at least once a day
02M39DosatronTE_MULTI_1617.indd 28
27/04/2016 13:57:12
