8
A
12
12
35
English
15 EN
16. Hot water dispensing
Scalding hazard
! Use the appropriate insulating devices
(A)
to move the water and steam nozzles.
The dispensing of hot water is controlled by the economizer
which permits mixing hot water from the boiler with fresh
cold water from the mains and controls its temperature.
With this system, water quality is improved and assures
the best results for the operator.
After having placed an appropriate container under the
dispenser (
8
), proceed in either of the following two ways:
- Press the DOSING BUTTON (
12
) that has the appropriate
memorization.
- For CONTINUOUS dispensing, press the STOP push
button (
35
).
Dispensing, whether for dosed servings or in the continuous
dispensing mode, can be interrupted at any time by pressing
the START-STOP push button (
35
).
NOTE:
-
When using any of the dosing buttons, dispensing
can be interrupted by pressing the STOP button
(35); the memorized data will not be affected.
-
The adjustment of the economizer for regulating
the delivered water temperature is made by the
installing service technician.
02M39DosatronTE_MULTI_1617.indd 15
27/04/2016 13:56:45