La Cimbali M100 GT, Руководство инженера

Страница: 40 / 82

English
35 EN
Grinder control parameters configuration
1. disable grinder control, if in use.
2. set and calibrate the machine and grinder/dispenser as
desired.
3. dispense into the test square all the types of beverages
to be used (double coffee, single coffee and any special
blend - third key).
4. write down the satisfactory flow values of the coffees for
each of the possible three types of beverage.
5. go to the grinder control panel and perform reset.
6. set the flow values for each of the beverages.
7. enable grinder control.
Note: Set the Q.ref of double coffees first for proper func
-
tioning of grinder control.
control of the flow (only if in use)
The appearance of this animated icon means that
adjustments need to be made to the grinder/dispenser to
tighten or
loosen the grinding, to return coffee dispensing to the
default parameters.
The icons that are shown are:
means that the grinding needs to be loosened.
(flow of coffee is lower than the reference).
means that the grinding needs to be tightened.
(flow of coffee is greater than the reference).
Note. The number next to the icon (1 or 2) indicates
which grinder/dispenser needs adjusting.
The icon appears on the display instead of the level sym
-
bol.
: manual grinder control (for grinder/dispensers with no bluetooth connection option.