Kzyee KM20 Скачать руководство пользователя страница 3

Multisystem Ignition Analyzer

 

 

- 2 - 

 

1.

 

IMPORTANT SAFETY INFORMATION     

  This  instrument can  be used  indoor,  the  temperature  should  between  32

  and 

104

( 0

  and 40

), altitudes up to 6500 ft ( 2,000 meters ). 

In  order  to  use  the  instrument  safely,  please  follow  all  the  safety  and  operating 

instructions of this manual to operate. The security feature of this instrument will be 
impaired if not following the manual to operate.

 

If  this  instrument,  the  capacitive  pick-up  or  the  flexible  probe  looks  damaged,  or 

you suspect that the instrument is operating abnormally, please do not use it under 
the circumstances. 

In order to avoid personal injury and damage to the instrument, capacitive pick-up 

or flexible probe, please keep away from the moving parts ( fan, transmission belts 
etc.) and hot objects (exhaust pipe, muffler, catalytic converter, etc) when using the 
instrument.   

  Please  do  not  connect  or  apply  more  than  42  VDC  or  any  AC  current  to  the 

capacitive pick-up or the flexible probe. 

  When  operate  the  circuit  above  60  V  DC  or  25  V  AC,  to  avoid  electrical  shock, 

please be careful at any time. Because such voltage may cause shock hazard. 

  Please do not operate the instrument when the battery cover is off. 

  In  order  to  avoid  electrical  shock  or  damage  to  the  instrument,  please  do  not 

exceed the specified input limits. 
 
When using this instrument, if exceeding the above limitation or not paying attention 
to  the  precautions,  it  may  cause  personal  injury  or  permanently  damage  to  the 
instrument or the vehicle under test. 
 
 

2. TECHNICAL SPECIFICATIONS

   

2.1 General Specifications

 

Display:                            LCD 128 x 64 digits screen.

 

 

Update rate:                      3 per second ( for LCD). 
Ignition system comp.:    Coil on plug, coil near plug, DIS, conventional and magneto.   

Engine cycles:                    2 and 4 cycles and DIS (distributorless ignition system). 

Power:                                9 Volt battery. 
Auto power off:            Automatically powers off after 3 min. of no operation. 
Battery life:                        Approximately 20 hours (w/alkaline battery). 
Probe length:                    35 cm, Including capacitive pick-up. 
Dimensions:                      165x100x32 mm without antenna. 
Weight:                                Approximately 0.363 kg (Including battery). 
Included  accessories:   

Padded hard carrying case, user’s manual,    rubber holster 

and 1x9 Volt alkaline battery.       

       

2.2 Electrical Specifications 

  The  specifications  below  are  in  the  standard  23

  environment,  there  will  be 

slight difference between different equipments and temperatures. To avoid personal 
injury or damage to the instrument, the input voltage should not exceed the specified 

Содержание KM20

















Отзывы: