Multisystem Ignition Analyzer
- 14 -
5. MAINTENANCE
5.1 Battery replacement
Fig. 8 - Battery replacement
To replace the internal battery:
1- As show in Fig.8, find out the battery compartment at the back of the instrument.
2- Open the battery cover.
3- Pay attention to the polarity of the battery connectors, connect the new battery.
4- Close the battery cover.
5- Press the
“ Power / Reset” button until the display turns on. Please check the
polarity of the battery if the display does not turn on, reinstall the battery if necessary.
To turn off the instrument, press the
“Power / Reset” button again until the display
turns off.
5.2 Cleaning
When not in use, please keep the instrument in the carrying case, do not subject it to
dampness or severe heat or cold. Do not use the instrument in rain, use a clean
paper towel to dry it off before storing it if it should accidentally get wet.
Prevent the instrument contacting with any solvents. Please do not clean it with a
solvent or petroleum based medium such as gasoline, as these chemical may attack
the plastic parts and cause permanent damage. Do not use an abrasive cleaner. Use
the clean damp paper towel to wipe and a small amount of soap if necessary. Dry the
instrument thoroughly after cleaning.
This unit is a sealed instrument, except the battery, it contains no user serviceable
parts. Open other parts of the instrument will void the warranty.
Содержание KM20
Страница 1: ......