Kzyee KM20, Инструкция по эксплуатации и правила безопасности, Страница: 10 / 16

Multisystem Ignition Analyzer
- 9 -
8- Place the capacitive pick-up over the ignition module, read the measurements.
Fig. 4-Capacitive pickup on coil on plug module
Important:
◆
In some engines, the ignition modules are close to each other, this may cause the
capacitive pick-up of the instrument receive signals from nearby modules, it may
cause false readings.
◆
In order to reduce interference from other ignition modules, the nearby ignition
modules should be completely covered with pieces of aluminum foil, make sure that
the aluminum foil is connected to the electrical grounding system of the engine.
Fig. 5
– Avoiding interference by shielding nearby ignition coils
3.4.3 Spark plug wire ignition systems
1- Turn on the instrument.
2- Please press the
“Ignition System” button to select if the instrument is not already
in the SPW (Spark Plug Wire) mode.