Kyocera TASKalfa 181, Руководство по обслуживанию

Страница: 146 / 355

2KJ/2KH
1-4-32
1-4-4 Electric problems
Troubleshooting to each failure must be in the order of the numbered symptoms.
Problem Causes Check procedures/corrective measures
(1)
The machine does
not operate when the
main power switch is
turned on. 1. The power cord is not
plugged in properly.
Check the contact between the power plug and the outlet.
2. No electricity at the
power outlet.
Measure the input voltage.
3. Broken power cord. Check for continuity. If none, replace the cord.
4. Defective main power
switch.
Check for continuity across the contacts. If none, replace the main
power switch.
5. Defective power source
PWB.
With AC present, check for 24 V DC at YC1-2, YC1-3 and YC1-4
on the power source PWB. If none, replace the power source
PWB.
(2)
The eject motor does
not operate. 1. Poor contact in the con-
nector terminals.
Reinsert the connector. Also check for continuity within the con-
nector cable. If none, remedy or replace the cable.
2. Defective drive transmis-
sion system.
Check if the rollers and gears rotate smoothly. If not, grease the
bushings and gears. Check for broken gears and replace if any.
3. Defective eject motor. Run maintenance item U030 and check if the eject motor oper-
ates. If not, replace the eject motor.
4. Defective engine PWB. Run maintenance item U030 and check if the eject motor oper-
ates. If not, replace the engine PWB.
(3)
The cassette drive
motor does not oper-
ate. 1. Poor contact in the con-
nector terminals.
Reinsert the connector. Also check for continuity within the con-
nector cable. If none, remedy or replace the cable.
2. Defective drive transmis-
sion system.
Check if the rollers and gears rotate smoothly. If not, grease the
bushings and gears. Check for broken gears and replace if any.
3. Defective cassette drive
motor.
Run maintenance item U030 and check if the cassette drive motor
operates. If not, replace the cassette drive motor.
4. Defective cassette main
PWB.
Run maintenance item U030 and check if the cassette drive motor
operates. If not, replace the cassette main PWB.
(4)
The scanner motor or
cooling fan motor 1, 2
does not operate. 1. Poor contact in the con-
nector terminals.
Reinsert the connector. Also check for continuity within the con-
nector cable. If none, remedy or replace the cable.
2. Broken motor coil. Check for continuity across the coil. If none, replace the motor.
(5)
The paper feed
clutch, registration
clutch or duplex feed
clutch does not oper-
ate. 1. Broken clutch coil. Check for continuity across the coil. If none, replace the clutch.
2. Poor contact in the con-
nector terminals.
Reinsert the connector. Also check for continuity within the con-
nector cable. If none, remedy or replace the cable.
3. Defective cassette PWB. Run maintenance item U032 and check if following terminals on
the cassette PWB goes low. If not, replace the cassette PWB.
Paper feed clutch: YC7-2 on the cassette PWB
Registration clutch: YC6-2 on the cassette PWB
Duplex feed clutch: YC5-6 on the cassette PWB
4. Defective engine PWB. Run maintenance item U032 and check if following terminals on
the engine PWB goes low. If not, replace the engine PWB.
Paper feed clutch: YC7-17 on the engine PWB
Registration clutch: YC7-18 on the engine PWB
Duplex feed clutch: YC7-12 on the engine PWB