111
2.
Remove the battery cover following steps 1-2 in
Install the Battery
.
3.
Grasp the white pull-tab extending from the battery pack and pull the battery out of
its compartment.
4.
Slide the SD card holder in the direction of the arrow to unlock it (
).
5.
Raise the card and the card holder with your fingers (
).
6.
Gently pull out the card from the holder (
).
7.
Replace the card holder and gently press them, and then slide the holder in the
direction of the arrow to lock it (
to
).
8.
Place the battery back into its compartment and replace the battery cover. See steps
3-5 in
Install the Battery
.
Note:
You can easily damage the microSD card by improper operation. Please be careful
when inserting, removing, or handling the microSD card.
Note:
Make sure your battery is fully charged before using the microSD card. Your data may
become damaged or unusable if the battery runs out while using the microSD card.
Install a microSD Card
1.
Remove the battery cover following steps 1-2 in
Install the Battery
.
2.
Slide the SD card holder in the direction of the arrow to unlock it (
).
