manualshive.com logo in svg

Kyocera ECOSYS FS-C5350DN, Руководство по обслуживанию

Поделиться
Скачать
Kyocera ECOSYS FS-C5350DN Скачать руководство пользователя страница 76

2K8

1-4-30

(13)The message 
requesting front 
cover to be closed is 
displayed when the 
front cover is closed.

Defective harness or 
improper connector inser-
tion.

Reinsert the connector. Also check for continuity within the con-
nector harness. If none, remedy or replace the harness.
Front cover open/close switch - Paper exit PWB (YC5)
Paper exit PWB (YC1) - Engine PWB (YC20)

Defective front cover open/
close switch.

Replace the front cover open/close switch.

Defective paper exit PWB.

Replace the paper exit PWB.

Defective engine PWB.

Replace the engine PWB (See page 1-5-29).

(14)The message 
requesting cover to 
be closed is dis-
played when the top 
cover is closed.

Defective harness or 
improper connector inser-
tion.

Reinsert the connector. Also check for continuity within the con-
nector harness. If none, remedy or replace the harness.
Interlock switch - Engine PWB (YC13)

Defective interlock switch.

Replace the interlock switch.

Defective engine PWB.

Replace the engine PWB (See page 1-5-29).

(15)The message 
requesting left cover 
to be closed is dis-
played when the left 
cover is closed.

Defective harness or 
improper connector inser-
tion.

Reinsert the connector. Also check for continuity within the con-
nector harness. If none, remedy or replace the harness.
Left cover switch - Engine PWB (YC14)

Defective left cover switch.

Replace the left cover switch.

Defective engine PWB.

Replace the engine PWB (See page 1-5-29).

(16)Defective waste 
toner box detecting.

Defective harness or 
improper connector inser-
tion.

Reinsert the connector. Also check for continuity within the con-
nector harness. If none, remedy or replace the harness.
Waste toner full sensor - Engine PWB (YC12)

Defective waste toner full 
sensor.

Replace the waste toner full sensor.

Defective engine PWB.

Replace the engine PWB (See page 1-5-29).

(17)Others.

Wiring is broken, shorted or 
makes poor contact.

Check for continuity. If none, repair.

Problem

Causes

Check procedures/corrective measures

Содержание ECOSYS FS-C5350DN



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды