manualshive.com logo in svg

Kyocera DF-420, Руководство по обслуживанию, Страница: 46 / 296

Поделиться
Скачать
Kyocera DF-420 Скачать руководство пользователя страница 46

3MX

1-3-25

U243

Checking the operation of the DP motors
Description

Turns the motors and solenoids in the DP on.

Purpose

To check the operation of the DP motors or solenoids.

Method

1. Press the start key.
2. Select the item to be operated using the cursor up/down keys.
3. Press the start key. The operation starts.

4. To stop operation, press the stop/clear key.

Completion 

Press the stop/clear key when operation stops. The screen for selecting a maintenance item No. is displayed.

U244

Checking the DP switches
Description

Displays the status of the respective switches in the DP.

Purpose

To check if respective switches in the DP operate correctly.

Method

1. Press the start key.
2. Turn the respective switches on and off manually to check the status.

When a switch is detected to be in the ON position, the display for that switch will be highlighted.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Motors and solenoids

F MOT

Original feed motor (OFM) is turned on.

C MOT

Original conveying motor (OCM) is turned on.

R MOT

Original switchback motor (OSBM) is turned on.

RJ SL

Switchback feedshift solenoid (SBFSSOL) is turned on.

RP SL

Switchback pressure solenoid (SBPSOL) is turned on.

Display

Switches

SET SW

Original set switch (OSSW)

TMG SW

DP timing switch (DPTSW)

MAT SW

DP open/close switch (DPOCSW)

COV SW

DP interlock switch (DPILSW)

REV SW

Original switchback switch (OSBSW)

SZ A SW

Original size length switch (OSLSW)

Содержание DF-420









































































































































































































































































































Отзывы:

Нет отзывов