manualshive.com logo in svg

Kyocera DF-420, Руководство по обслуживанию

Kyocera DF-420 - это высококачественный оригинальный сервисный мануал, который вы можете бесплатно скачать на нашем веб-сайте. Этот руководство поможет вам быстро решить любые проблемы с устройством Kyocera DF-420. Посетите manualshive.com для скачивания.

Поделиться
Скачать
background image

3MZ

1-4-3

U03400 

Polling reception was interrupted because of a mismatch in individual numbers (destination unit is 
either of our make or by another manufacturer).

U03500 

In confidential polling reception, the specified confidential box No. was not registered in the desti-
nation. Or, in interoffice subaddress-based bulletin board reception, the specified Subaddress con-
fidential box number was not registered in the destination unit. Or, the destination was being 
accessed.

U03600 

Confidential polling reception was interrupted because of a mismatch in specified confidential box 
No. Or, an interoffice subaddress-based bulletin board reception was interrupted because of a mis-
match in the specified subaddress confidential box number.

U03700 

Confidential polling reception failed because the destination unit had no confidential polling trans-
mission capability or data was not accumulated in any box in the destination unit. Or, interoffice 
subaddress-based bulletin board reception failed because the destination unit had no subaddress-
based bulletin board transmission capability, or data was not stored in any subaddress confidential 
box in the destination unit.

U04000 

The confidential box specified for confidential transmission was not registered in the destination 
unit. Or, in interoffice subaddress-based transmission mode, the specified subaddress box number 
was not registered in the destination unit. Or, the destination was being accessed.

U04100 

Confidential transmission failed because the destination unit had no confidential capability. Or, 
subaddress-based transmission failed because the destination unit had no subaddress-based 
reception capability.

U04200 

In encrypted transmission, the specified encryption box was not registered in the destination unit.

U04300 

Encrypted transmission failed because the destination unit had no encrypted communication capa-
bility.

U044XX 

Communication was interrupted because of an encryption key error during encrypted transmission 
(refer to page 1-4-10 U044XX error code table).

U04500 

Encrypted reception was interrupted because of a mismatch in encryption keys.

U05000 

In transmission with a specified number, the set number of originals was different from the number 
of transmitted originals.

U05100 

Password check transmission or restricted transmission was interrupted because the permit ID’s 
did not agree with.

U05200 

Password check reception or restricted reception was interrupted because the permit ID’s did not match, 
the rejected FAX number’s did match, or the destination receiver did not return its phone number.

U05300 

The password check reception or the restricted reception was interrupted because the permitted 
numbers did not match, the rejected numbers did match, or the machine in question did not 
acknowledge its phone number.

U09000 

G3 communication was attempted but failed because the destination unit was a G2 machine.

U12000 

Relay broadcast was requested from a command station but memory overflowed during reception. 
Or, in subaddress-based relay reception, memory overflowed.

U12100 

Relay was commanded but memory overflowed in the destination unit (relay station).

U14000 

Memory overflowed during confidential reception. Or, in subaddress-based confidential reception, 
memory overflowed.

U14100 

Memory overflowed in the destination unit during confidential transmission. Or, in interoffice sub-
address-based transmission, memory overflowed in the destination unit.

U19000 

Memory overflowed during memory reception.

U19100 

Memory overflowed in the destination unit during transmission.

U19200 

Memory transmission failed because a decoding error occurred.

U19300 

Transmission failed because an error occurred during JBIG encoding.

U19400 

Reception failed because an error occurred during JBIG decoding.

Error code

Description

Содержание DF-420









































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DF-420

Panasonic WV7220D - CCTV ACCESSORIES Operating Instrctions preview
WV7220D - CCTV ACCESSORIES
Бренд: Panasonic Страницы: 10
Panasonic WV-NS202 - i-Pro Network Camera Instructions preview
WV-NS202 - i-Pro Network Camera
Бренд: Panasonic Страницы: 2
Panasonic WV-CS4SA Operating Instructions preview
WV-CS4SA
Бренд: Panasonic Страницы: 2
Panasonic WV-7110AE Operating Instruction preview
WV-7110AE
Бренд: Panasonic Страницы: 12
Panasonic PPDW12 Product Features preview
PPDW12
Бренд: Panasonic Страницы: 3
Panasonic KX-TG5561 Quick Manual preview
KX-TG5561
Бренд: Panasonic Страницы: 8
Panasonic HVX200 Quick Start Manual preview
HVX200
Бренд: Panasonic Страницы: 4
Panasonic BB-HGW700A - Network Camera Router Installation & Troubleshooting Manual preview
BB-HGW700A - Network Camera Router
Бренд: Panasonic Страницы: 32
Panasonic AU-VCVF10G Operating Instruction preview
AU-VCVF10G
Бренд: Panasonic Страницы: 19
Panasonic AJ-VF15BP Service Manual preview
AJ-VF15BP
Бренд: Panasonic Страницы: 59
Zacuto HVX200 Instructions preview
HVX200
Бренд: Zacuto Страницы: 4
i-PRO WV-QCL500-S Operating Instructions preview
WV-QCL500-S
Бренд: i-PRO Страницы: 2
WÄRTSILÄ RS24 User Manual preview
RS24
Бренд: WÄRTSILÄ Страницы: 64
Olympus P-10 Instruction preview
P-10
Бренд: Olympus Страницы: 2
Qcells Q.HOME+ ESS HYB G2 Installation Quick Manual preview
Q.HOME+ ESS HYB G2
Бренд: Qcells Страницы: 2
Tally T8106 Operation Manual preview
T8106
Бренд: Tally Страницы: 53
Tally T2265 SprintPro Operator'S Manual preview
T2265 SprintPro
Бренд: Tally Страницы: 30
Tamron A056 Owner'S Manual preview
A056
Бренд: Tamron Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды