Kyocera Mita Vi7360, Инструкция по эксплуатации

Страница: 256 / 292

Key Operator Mode 13-43
Key Operator Mode
Memory Switch Setting [13] (continued)
[11] RADF APS
The copier automatically selects the same size copy paper as the original placed on the
RADF. (In reduction/enlargement mode, an appropriate paper size is selected according
to the ratio.)
[12] Platen AMS
The copier detects the size of the platen original and selects the appropriate
magnification ratio to correspond to the selected paper size.
[13] RADF AMS
After detecting the original size placed on the RADF the copier automatically selects an
appropriate ratio for the copy when copy size is selected manually.
[14] Select tray when APS cancel
Select the tray to be automatically selected when APS is released.
[15] Platen original size detect
Select the series of the original paper size detected from the platen glass.
[16] RADF original size detect
Select the series of the original paper size detected from the RADF.
[17] Platen orig. size detect (SMALL)
Select the minimum original size detected from the platen glass.
[18] Rotation
Select to activate the Rotation function, activate Rotation only when APS/AMS functions,
or activate Rotation only when APS/AMS/Reduce functions.
[19] Rotation (180 angle)
Set Orientation correction to function anytime or when Rotation is disabled.
[20] B6R size original type
Select the orientation of the B6R size original.
[21] A3, B4, 11x17, 8.5x14, F4 orig. type
Select the orientation of the A3, B4, 11"x17", 8.5"x14", or F4 size original.
[22] Staple mode reset-function
Staple mode is automatically canceled after a job is completed with Staple sort mode
ON. (Sort mode is selected.)