Kyocera Mita Vi7360, Инструкция по эксплуатации

Страница: 209 / 292

12-6 Shortcuts
Shortcuts
Book Copy
(p. 9-19)
1 First, load letter sheets in a regular tray or in the Multi-sheet bypass tray.
2 Touch
APPLI.
to display the Application selection screen.
3 Touch
Book Copy
to display the Book copy screen with AUTO layout and Non-image
area erase selected.
4 Touch
Full scan
,
Front cover + Full scan
, or
Front/Back cover + Full scan
, as required.
To change the binding mode, touch
REVERSE THE SIDE OF OPEN PAGE
.
5 Touch
OK
to return to the Application selection screen.
6 Make additional copying selections.
7 Touch
OK
to return to the Basic screen with the Store mode automatically selected.
8 Select 1-1 or 1-2 copy mode and enter the print quantity amount.
9 Position the open book in the right rear corner on the platen glass.
10 Align the edges of the book with the right measuring guide plate, then press [
START
]
to begin scanning.
11 Repeat Steps 9 to 10 to copy subsequent pages from the book, pressing [
START
] to
scan each page.
12 Touch
STORE
to remove its highlight and thus turn off the Store mode.
13 Press [
START
]. When copying is completed, press [
AUTO RESET
] to reset the machine.
Program Job
(p. 9-21)
1 Touch
APPLI.
to display the Application selection screen.
2 Touch
Program Job
to scan multiple sets of originals in different settings (called
JOBs) and then to output them all as a complete set.
3 Make additional copying selections for the first JOB.
4 Touch
OK
to return to the Basic screen. Store mode is automatically selected.
5 Position original(s) face up in the document feeder or face down on the platen glass,
select the tray you want to use, then press [ START ] to scan.
6 When scanning for the current JOB is completed, the popup menu will be displayed.
To store the current JOB images, touch
DECISION
.
To delete the images, touch
CANCEL
.
7 Repeat steps 3 to 6 until all JOB originals are scanned.
8 Select the desired output mode and enter the print quantity amount.
9 Touch
STORE
to remove its highlight and thus turn off the Store mode.
10 Press [
START
]. When copying is completed, press [
AUTO RESET
] to reset the machine.
Non-Image Area Erase
(p. 9-23)
1 Touch
APPLI.
to display the Application selection screen.
2 Touch
Non-Image Area Erase
.
3 Make additional copying selections.
4 Touch
OK
to return to the Basic screen.
5 Enter the print quantity amount.
6 Position original face down on the platen glass, keeping the document cover open.
7 Press [
START
]. When copying is completed, press [
AUTO RESET
] to reset the machine.