9-18 Applications
Applications
Image Insert (continued)
1 Review pages to be scanned from the document feeder, and note the page number
locations for inserting images scanned from the platen glass.
To insert more than one sheet at the same location, enter the page number repeatedly. For
example, if insertion locations are [2/2/6], scanned platen images will be inserted as follows:
• The first scanned platen image will be inserted after page 2.
• The second scanned platen image will be inserted directly after the first scanned
Image insertion.
• The third scanned platen image will be inserted after page 6.
2 Touch
APPLI.
on the Basic Screen to display the Application Selection Screen.
3 Touch
Image Insert
to display the Image Insertion No. Setting Screen.
4 Use the keypad to enter the page numbers for up to 30 insertion locations, touching
SET
after each entry.
• When a page number is larger than the total original count, a sheet is inserted as
the last page.
• Insertions occur in sequence, even if page numbers are entered out of sequence.
• To clear an incorrect entry, touch
DELETE
or [
C (CLEAR QTY.)
], then enter the
correct page number.
• When setting more than 15 locations, touch the arrow key to move to the next page.
Option: Touch Booklet on the Image Insertion Setting No. Screen to use this function.
5 When all page number entries are made, touch
OK
. The Application Selection Screen
will be restored.
6 Select additional copying features, as desired.
7 Touch
OK
to complete the setting and return to the Basic Screen. The Store mode is
automatically selected.
8 Scan the document feeder images.
(1) Position originals FACE UP in the document feeder.
(2) Press [
START
] to scan originals.
9 Enter the desired print quantity.
10 Scan the platen glass images.
(1) Open the document feeder.
(2) Position an original FACE DOWN on the platen glass, then close the document feeder.
IMPORTANT: PLACE AND SCAN THE ORIGINALS ACCORDING TO PAGINATION.
(3) Press [
START
] to scan the original.
(4) Remove the original, and repeat for each original.
Be sure to press [
START
]
for each original.
Option: Press [CHECK] to view the selection, and make a Proof copy if desired; then EXIT to return to
the Basic Screen. See p. 6-35 to p. 6-37.
11 Start printing.
(1) Touch
STORE
to deselect it.
(2) Press [
START
].
After copying is completed, touch
Image Insert
on the Application Selection Screen or
press [
AUTO RESET
] to release the mode and reset the machine.
Содержание Vi7360
