Kyocera Mita Vi7360, Инструкция по эксплуатации

Страница: 249 / 292

13-36 Key Operator Mode
Key Operator Mode
Weekly Timer [9] (continued)
Timer Interrupt Password Setting [5]
Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
Weekly Timer Setting Menu Screen Timer Interrupt Password Setting Screen
1 Press [
HELP
] to display the Help Screen, then touch
Key Operator Mode
.
Enter a 4-digit key operator password, then touch
OK
to display the Key Operator
Mode Screen. (See note 1.)
2 Touch
[9] Weekly timer
. Enter your 4-digit Weekly timer master key code, then touch
OK
to display the Weekly Timer Setting Menu Screen. (See note 2.)
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit code.
3 Touch
[5] Timer interrupt password set
to display the Timer Interrupt Password
Setting Screen.
4 Use the touch screen keypad to enter a 4-digit password, and then touch
OK
to
complete the setting and return to the Weekly Timer Setting Menu Screen.
NOTE: When the password setting is 0000, timer interrupt can be used simply by turning the copier OFF,
then ON. In this case, you will be asked to enter the duration of use (a period of time to turn the copier
power on).
5 If other Weekly timer settings are required, select another desired menu item, from
[1]~[5].
6 Touch
PREVIOUS SCREEN
to restore the Key Operator Mode Screen. If other key
operator settings are required, select the desired menu item, from [1] to [18].
7 If no further changes are required, touch
PREVIOUS SCREEN
to restore the Basic
Screen to perform copying operations.