Kyocera Mita Vi7360, Инструкция по эксплуатации

Страница: 220 / 292

Key Operator Mode 13-7
Key Operator Mode
System Initial Setting [1]
Set the following initial conditions of the copier.
• Date & Time setting: Current date and time, summer time
• Language select setting: Language used in LCD (English)
• IP address setting: IP address to be accessed from PC
Date & Time Setting [1]
Set the current date and time, and also the summer time.
❒
Default setting: Summer time off
System Initial Setting Menu Screen Date & Time Setting Screen
1 Press [
HELP
] to display the Help Screen, then touch
Key Operator Mode
.
Enter a 4-digit key operator password, then touch
OK
to display the Key Operator
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch
[1] System initial setting
to display the System Initial Setting Menu Screen,
then touch
[1] Date & Time setting
to display the Date & Time Setting Screen.
3 Adjust the time.
The time indicated by the copier is displayed in the upper line and ordered by date,
month, year, and time (in 24-hour expression). In the lower line, the highlighted
section can be changed by using the keypad on the screen.
Touch
SET
to move the highlighted section to the number to be changed.
4 To activate the summer time function, touch
Summer time
to highlight it. The Present
time will gain an hour.
5 Touch
OK
to update the Present time by the Setting time and return to the System
Initial Setting Menu Screen.
6 If no further changes are required, proceed to step 8.
7 If other system initial settings are required, touch desired key.
8 Touch
PREVIOUS SCREEN
to restore the Key Operator Mode Screen.
9 Touch
PREVIOUS SCREEN
to restore the Basic Screen to perform copying operations.