Kyocera Mita DF-75, Руководство по обслуживанию

Страница: 156 / 199

5-21
CHAPTER 5 TROUBLESHOOTING
4.1.9 C8340, Staple/Fold Motor Fault (detail code: 03)
Staple/fold clock sensor (PI4)
1) Check the staple/fold clock sensor. Is the sensor normal?
NO: Replace the sensor.
Finisher controller PCB, Saddle unit
2) Does the staple/fold motor operate at the appropriate timing?
YES: Replace the finisher controller PCB.
NO:
Check the saddle unit drive mechanism: if faulty, correct it; other-
wise, go to step 3.
Staple/fold motor (M7), Finisher controller PCB
3) Try replacing the staple/fold motor. Is the problem corrected?
YES: End.
NO:
Replace the finisher controller PCB.
T05-401-09
4.1.10 C0360, Slide Motor Fault (detail code: 01/02)
Slide home position sensor (PI18)
1) Check the slide home position sensor. Is the sensor normal?
NO: Replace the sensor PCB.
Wiring
2) Is the wiring between the finisher controller PCB and the slide motor
normal?
NO: Correct the wiring.
Stapler unit
3) Is there mechanical trapping in the stapler path?
YES: Correct the mechanical system.
Slide motor (M8), Finisher controller PCB
4) Try replacing the slide motor. Is the problem corrected?
YES: End.
NO:
Replace the finisher controller PCB.
T05-401-10