Kyocera Mita DF-75, Руководство по обслуживанию

Страница: 103 / 199

3-14
CHAPTER 3 MECHANICAL SYSTEMS
2) With the paper fold rollers and saddle
cam positioned as shown in Figure F03-
102-14, mount gears as shown in figure
F03-102-15.
• Align the mark (either of two
marks) on the saddle cam drive gear [3]
with the
mark on the relay gear [4]
(on the half of the periphery where gears
with a smaller face width are arranged).
• With the mark on the saddle cam
drive gear [3] aligned with the mark
on the relay gear [4], align the other
mark on the relay gear withy the rib of
the paper folding roller drive gear [5].
F03-102-15
1.2.4 Removing the Saddle Unit
1) Remove the front cover. (See 1.1.2.)
2) Remove the rear cover. (See 1.1.3.)
3) Open the jam removal cover [1]; then,
remove the two screws [2] and the right
stay [3].
F03-102-16
[3]
[2]
[1]
[2]
[3]
[4]
[5]