manualshive.com logo in svg

KYMCO Xciting 250i, Руководство пользователя, Страница: 88 / 92

Поделиться
Скачать
KYMCO Xciting 250i Скачать руководство пользователя страница 88

86

Crankcase Emission Control System

Your Xciting scooter’s engine is equipped with a closed crankcase system. Blow-by gases are routed back in to the combus-

tion chamber via the intake system.  This system does not allow the blow-by gases to enter the atmosphere.

Exhaust Emission Control System

The exhaust emissions from your Xciting scooter are controlled by engine design, factory-set fuel delivery, ignition settings,

and exhaust system design. This system also includes a catalyzer in the exhaust system.

Noise Exhaust Emission Control System

The engine, intake and exhaust systems of your Xciting scooter were designed to comply with federal, state and local noise

level requirements. Do not modify the engine ,intake or exhaust components, as doing so will affect compliance these noise

level requirements.

Please do not modify or change any KYMCO-designed components that may alter the sound or emission level from

your Xciting scooter.

 EMISSION CONTROL & WARRANTY INFORMATION

KYMCO LIMITED WARRANTY

NOISE EMISSIONS

KYMCO USA Inc, 5 Stan Perkins Road, Spartanburg, SC29307, USA warrants that this vehicle was designed, manufac-

tured and equipped so that when new, it would conform with the applicable Motorcycle Noise Regulations of the U.S. EP A

Environmental Protection Agency.
This warranty is not limited to any particular part, component or system of the vehicle. Defects in design, assembly, or in any

part, component or system of the vehicle which, at the time of sale to the first purchaser , caused noise emission levels to

exceed applicable Federal standards in effect at the time of manufacture, are covered by this warranty .

Содержание Xciting 250i





























































































Отзывы:

Нет отзывов