KYMCO Xciting 250i Скачать руководство пользователя страница 78

Страница: 78 / 92

MAINTENANCE

STORAGE GUIDE

Extended storage, such as for the winter months, requires that

you take certain steps to reduce the effects of deterioration

from the non-use of your scooter. Whenever possible, perform

any necessary periodic maintenance or repairs before storage

so the scooter will be in good condition for riding when it is

removed from storage.

Storage

1. Change the engine oil and filter.
2. Make sure the cooling system is filled with a 50/50% anti-

freeze solution.

3. Drain the carburetor (if equipped) and empty the fuel tank

into an approved gasoline container using a commercially

available hand siphon or an equivalent method. Spray the

inside of the tank with an aerosol rust-inhibiting oil. Close

the fuel filler cap on the fuel tank

Gasoline is highly flammable and explosive. You can

be burned or seriously injured when handling fuel. Stop

the engine and keep heat, sparks, and flame away. Re-

fuel the scooter outdoors and wipe up any spills imme-

diately.

4. To prevent rusting in the cylinders, perform the following:

Remove the spark plug cap from the spark plug, and use tape

or string to secure the caps to any convenient plastic body part

so that they are positioned away from the spark plugs.

Remove the spark plugs from the engine and store them in

a safe, dry place. Do not connect the spark plugs to the

spark plug caps.

Pour a tablespoon (15 - 20 cc) of clean engine oil into each

cylinder and cover the spark plug holes with a piece of cloth.

Crank the engine several times to distribute the oil.
Reinstall the spark plugs and spark plug caps.

5. Remove the battery. Store it in an area protected from freez-

ing temperatures and direct sunlight. Slow charge the bat-

tery once a month (use a quality charger designed for use

on a maintenance-free type battery).

6. Wash and dry the scooter. Wax all painted surfaces. Coat

the chrome or bare aluminum parts with rust inhibiting oil.

7. Inflate the tires to their recommended pressures. Place the

scooter on blocks to raise both tires of f the ground.

8. Cover the scooter (don't use plastic or other coated materi-

als) and store in an unheated area, free of excessive mois-

ture, with a minimum of daily temperature variation. Do not

store the scooter in direct sunlight as the sun's UV rays can

damage the body work and other components.

Содержание Xciting 250i





























































































Результаты поиска

Содержание Xciting 250i

Отзывы:

KYMCO Xciting 250i, Руководство пользователя, Страница: 78 / 92

Результаты поиска

Содержание Xciting 250i

Отзывы: