manualshive.com logo in svg

KYMCO Xciting 250i, Руководство пользователя, Страница: 43 / 92

Поделиться
Скачать
KYMCO Xciting 250i Скачать руководство пользователя страница 43

41

 OPERATION

Parking

1. After stopping the scooter turn the ignition switch counter-

clockwise to the " " (OFF) position and remove the key.

2. Use the center stand to support the scooter while parked.

3. Lock the steering (see page 17) to help prevent theft.

Always park your the scooter on firm, level ground to

help prevent it from falling over.
If you must park on an incline, aim the front of your

scooter uphill and place it on the center stand.
If you are parking an Xciting 500i / 500Ri model, you

can use the side stand in combination with the parking

brake.

The exhaust pipe and muffler become very hot during

operation and remain sufficiently hot for some time af-

ter stopping the engine to inflict serious burns.
Park your scooter where pedestrians or children are not

likely to touch the muffler.
Make sure flammable materials such as dry grass or

leaves do not come in contact with the exhaust system

when parking your scooter.

Содержание Xciting 250i





























































































Отзывы:

Нет отзывов