KYMCO 125 DINK -, Руководство по обслуживанию

Страница: 394 / 400

20. LIGHTS/METERS/SWITCHES
20-11
DINK 200i/125
Remove the fuel unit (5).
INSPECTION
Connect the fuel unit wire connectors and
turn the ignition switch “ON”.
Check the fuel meter for correct indication by
moving the fuel unit float up and down.
Float Position Display
Upper Much (Full)
Lower Less (Empty)
Wire Terminals Display
Free
From Much to
Less
Apply
From Less to
Much
The fuel meter is normal if it operates as
above indicated. If not, check for poorly
connected terminals or shorted wires.
Measure the resistance between the
Yellow/White and Blue/White terminals of
the fuel unit connector.
Standard (at 20°C/68°F) :
Float at full position 1100 ± 33
Float at empty position 100 ± 3
Be careful not to bend or damage the
fuel unit float arm.
• •
Before performing the following test,
operate the turn signals to determine that
the battery circuit is normal.
• •