KYLAND Technology SICOM3024P, Руководство по работе в сети

Страница: 45 / 147

Advanced Configuration
38
6.2.5 Typical Configuration Example
As shown in the following figure, the entire LAN is divided into 3 VLANs: VLAN2, VLAN100
and VLAN200. It is required that the devices in a same VLAN can communicate to each
other, but different VLANs are isolated. The terminal PCs cannot distinguish Tag packets, so
the ports on connecting Switch A and Switch B with PCs are set to Untag port. VLAN2,
VLAN100 and VLAN200 packets need to be transmitted between Switch A and Switch B, so
the ports connecting Switch A and Switch B should be set to Tag ports, permitting the
packets of VLAN 2, VLAN 100 and VLAN 200 to pass through. The following table shows
specific configuration.
Table 5 VLAN Configuration
Item Configuration
VLAN2 Set port 1 and port 2 of Switch A and B to Untag ports, and port 7 to Tag port.
VLAN100 Set port 3 and port 4 of Switch A and B to Untag ports, and port 7 to Tag port.
VLAN200 Set port 5 and port 6 of Switch A and B to Untag ports, and port 7 to Tag port.
Figure 37 VLAN Application