KYLAND Technology SICOM3024P, Руководство по работе в сети

Страница: 52 / 147

Advanced Configuration
45
Figure 45 Port Trunk
If Switch A sends packets to Switch B by way of the aggregated link, Switch A determines the
member port for transmitting the traffic based on the calculation result of load sharing. When
one member port of the aggregated link fails, the traffic transmitted through the port is taken
over by another normal port based on traffic sharing algorithm.
6.5.3 Description
Port trunk and the following port configurations cannot be used together:

Port redundancy: A port added to a trunk group cannot be configured as a redundant port,
while a redundant port cannot be added to a trunk group.

Port mirroring: A port added to a trunk group cannot be configured as a mirroring
destination or source port.
In addition, the following operations are not recommended.

Enable GMRP on a trunk port.

Add a GMRP-enabled port to a trunk group.

Add a trunk port to a static unicast/multicast entry.

Add a port in a static unicast/multicast entry to a trunk group.
Caution:

Gigabit ports of the series switches do not support port trunk.

A port can be added to only one trunk group.