2.3
Wiring the TracVision S3 System
The baseplate connectors have been changed to make installation easier.
TracVision S3 Cable Ports
Figure 2-14 shows the antenna unit’s exterior baseplate cable
ports, consisting of two RF connectors (ports #1 and #4) and two
liquid-tight fittings (ports #2 and #3). Figure 2-15 shows the
interior baseplate wiring. Refer to these figures when connecting
cables to the antenna unit.
2.3.1 Wiring the Antenna Data Cable
The data cable now enters the baseplate through the second liquid-tight
fitting (cable port #3). Interior baseplate wiring is unchanged.
Antenna Data Cable-to-Baseplate Terminals Wiring Process
1. Feed the cable up to the roof and through the
second liquid-tight fitting (#3) as pictured in
Figure 2-14.
2
Power
(#2)
Data
(#3)
RF1
(#4)
RF2
(#1)
Used only with
N. American Systems
Figure 2-14
Cable Port Assignments
(Exterior of Baseplate)
RF Cable
Power
Data
Figure 2-15
Interior Baseplate Wiring
