54-0274-01 Rev. C
1
© 2006 KVH Industries, Inc., All rights reserved.
These instructions explain how to install the TracVision M3 satellite TV antenna
system on a vessel. Complete instructions on how to use the system are provided in
the Quick Start Guide and Receiver User’s Guide.
TracVision
®
M3 Installation Guide
Who Should Install the System?
To ensure a safe and effective installation, KVH recommends that a KVH-authorized
marine technician install the TracVision M3 system. To find a technician near you, go to
www.kvh.com/wheretogetservice
. If you purchased the product and decide to install it
yourself, please see the enclosed warranty statement for warranty implications.
Technical Support
If you need technical assistance, please contact KVH
Technical Support:
Phone: 1-401-847-3327
E-mail: [email protected]
KVH and TracVision are registered trademarks of KVH Industries, Inc.; DIRECTV is a registered trademark of DIRECTV, Inc.
The unique light-colored dome with dark contrasting base is a registered trademark of KVH Industries, Inc. U.S. patents pending.
The information in this document is subject to change without notice. No company shall be liable for errors contained herein.
Important Safety Precaution
DO NOT apply power to the TracVision antenna with the radome removed
because the antenna has moving parts that can cause injury.
CAUTION
Installation Steps
1.
Inspect parts and get tools
7. Wire the receiver
2.
Plan the installation
8. Connect
power
3.
Prepare the mounting site
9.
Install the receiver
4.
Wire the antenna
10. Install batteries in the remote
5.
Remove the restraint
11. Test the system
6.
Mount the antenna
12. Educate the customer
ST Version with DIRECTV
®
Mobile Receiver
