1. Unpack the box and ensure it contains
everything shown on the Contents List.
Save the packaging in case you need to reship
the system.
2. Carefully examine all of the supplied
parts to ensure nothing was damaged in
shipment.
3. Gather all of the tools and materials listed
below. You will need these items to
complete the installation.
4. Peel off the extra serial number label
(taped to the antenna) and affix it in the
appropriate box on the red Activation
Card.
54-0274-01 Rev. C
2
© 2006 KVH Industries, Inc., All rights reserved.
Inspect Parts and Get Tools
1
Always lift the antenna by the
silver base and never by the
radome or any portion of the
internal antenna assembly.
• #2 Phillips-head
screwdriver
•
7
⁄
16
" open-end wrench
•
7
⁄
16
" socket wrench
•
1
⁄
2
" socket or open-end
wrench
• Electric drill
•
5
⁄
16
" (8 mm) drill bit
• Silicone sealant or
equivalent
• Hole saw of desired diameter
(for cable access hole, see page 4)
• Adhesive tape
• Light hammer
• Center punch
• Eight (8)
1
⁄
4
" fasteners
(optional for mounting the receiver,
see page 10)
Affix Serial
Number
Antenna
Receiver
Connector
Cover
Radome
Base
051099999
