1. Remove the three #10-32 screws securing the
radome to the antenna. Carefully remove the
radome and set it aside in a safe place.
Due
to the snug fit, some contact between the
radome’s sealing gasket and the antenna
mechanism is normal.
2. Using a
7
⁄
16
" socket wrench, remove the
shipping restraint bolt, washer, and spacer
securing the antenna assembly to the base.
Save the restraint for future use.
3. Position the antenna onto the mounting
surface. The antenna’s base should rest
squarely atop the foam seal.
4. Align the four holes in the antenna’s base
with the four holes in the mounting surface.
Be sure that the antenna’s
“Forward” arrow points
toward the bow and is
parallel to the vessel’s
centerline.
54-0274-01 Rev. C
6
© 2006 KVH Industries, Inc., All rights reserved.
Remove the Restraint
5
Antenna
Radome
Washer
Bolt
Spacer
Be sure to remove the shipping
restraint bolt, washer, and spacer.
The antenna will not work with this
hardware still installed.
“Forward” Arrow
Shipping Restraint
