Chapter 4: Using the web interface
Setting up the interfaces
64
Your terminal will then use the static IP address set up for your SIM card.
7. Set
IP Header compression
to
Enabled
or
Disabled
.
For information on IP Header compression, see
8. Select the source of the
APN
(Access Point Name).
There are four options for setting the APN. Unless you have special
requirements, it is recommended to use the SIM default, or to set the common
APN to SIM default, and then select Common here. You have the following
options:
•
Common
. The APN is taken from the Common APN defined under
SETTINGS > Common. Refer to
Setting the common interface settings
•
SIM default
. The APN is taken from the SIM card. If you want to use a static
IP address on the external network, select this option either here or in the
Common setting.
•
Network assigned
. The APN is assigned from the network.
•
User defined
. Type in the APN. APNs are provided from the Airtime
Provider.
9. If your APN uses a password, type in the user name and password provided
from the Airtime Provider.
10. At
Automatic activation
select whether the connection should be activated
automatically or manually.
•
Disabled
means you can activate/deactivate the connection from the
Dashboard.
•
Enabled
means the connection is activated automatically as soon as the system
is ready. This setting is used by default for the Group 0 user group.
Note
Static IP is handled by the service provider.
Do not type in a static IP
address
in the Static IP address field; a manually typed IP address will
currently not be used by the network.
Note
If you are going to use the static IP address from your SIM card, the user
name and password are mandatory! See step 6. above.
Содержание TracPhone FB150
Страница 1: ...User s Guide TracPhone FB150...
Страница 132: ......