KVH Industries TracPhone FB150, Руководство пользователя

Страница: 36 / 140

Chapter 3: Operating the system
Using a phone 27
Holding a call
During a call, you may place the initial call on hold while another call is made.
IP handset:
Select Options > Hold in the IP handset. For further details, refer to the section
“Handling calls” in the user manual for the IP handset.
Analog 2-wire phones with R key:
Note
Different types of phone have different methods/keys for the functions
listed below. If you have another type of phone than the ones listed below,
refer to the documentation for your phone/handset.
If you want to: Do as follows (standard 2-wire phone):
Place a call on hold. Press R 2 # .
Place the existing call on hold
and establish a new call.
Press R and dial the second phone
number followed by # .
Shuttle between the two calls. Press R 2 #
(irrespective of whether the second call
was acquired using Call Hold or
acceptance of Call Waiting.)
Clear the held call, if no
waiting call exists.
Press R 0 # .
Clear an active call and return
to the held call.
Press R 1 # .
Note that this is only possible if no
waiting call exists.