Chapter 2: Getting started
Entering the SIM PIN for the terminal
15
Entering the SIM PIN for the terminal
Do you need a SIM PIN?
Depending on your SIM card, you may have to enter a SIM PIN to use the system.
Your SIM PIN is supplied with your SIM card. You can enter the PIN using a
standard phone, the IP handset or the web interface.
For information on how to connect the IP handset or computer you are going to use,
see
Connecting a computer to the LAN interface
Entering the SIM PIN using a phone or IP handset
To enter the SIM PIN
If you have a phone connected to the terminal, you can use it to enter the SIM PIN
for the terminal at start up.
Do as follows:
•
For an analog phone
:
Pick up the phone. When the terminal is waiting for a PIN, you will hear 2 beeps
- pause - 2 beeps - etc.
Dial <
PIN
> followed by
#
.
When you hear a “busy” tone or a dialing tone, the PIN has been accepted and
you can hang up or dial a number.
•
For t
he
IP handset:
Select the
BGAN
menu, select
Enter PIN
and enter the administrator user name
and password for the terminal (default: “admin” and “1234”). Then enter the
PIN for the terminal. Note that the menu item “Enter PIN” is only available if the
terminal is waiting for a PIN.
Wrong SIM PIN
Analog phone
:
If, instead of the busy tone or dialing tone, you continue to hear 2 beeps - pause - 2
beeps - etc., it means the SIM PIN was not accepted. Check that you have the correct
PIN and try again.
If a wrong PIN has been entered three times in the terminal, you will hear 3 beeps -
pause - 3 beeps - etc. This means you have to enter the PUK (PIN Unblocking Key)
provided with your SIM card.
After entering the PUK, you must enter a new PIN of your own choice (4 to 8 digits
long).
Dial the following:
<PUK> * <New PIN> * <New PIN>
followed by
#
or off-hook key.
Note
Using an Administrator user name and password you can change the PIN
and enable or disable the use of a PIN. For further information, see
Содержание TracPhone FB150
Страница 1: ...User s Guide TracPhone FB150...
Страница 132: ......