TracPhone V7 User’s Guide
35
Chapter 3 - Configuration
Configuring Your Computer for mini-VSAT Broadband
Follow the steps below to configure your computer for DHCP
addressing. This will allow your computer to communicate with the
modem via its Ethernet connection.
NOTE: If you wish to set up a wireless connection, set up and test a wired
Ethernet connection first. Then purchase a wireless access point (WAP),
connect it to the switch, and follow the wireless setup instructions provided
with the WAP.
NOTE: If you wish to connect multiple communication systems to the
vessel’s network of computers, you will need to purchase a middleware
solution, such as KVH’s CommBox
™
(KVH part #72-0470 (C2 compact) or
#72-0472 (R8 rack-mount)). The CommBox also offers least cost routing,
firewall, bandwidth management, web caching, and optimization features.
KVH Technical Support fully supports the four operating systems
described here: Windows 7, Vista
™
, and XP, and Macintosh
®
OS X.
If the system is installed on a steel vessel, setting up a wireless
connection might require a special WAP and the services of a
technician with advanced networking expertise.
IMPORTANT!
When setting up a wireless network, be sure to apply security
settings, such as encryption, to protect your network from outside
intrusion. If your network is not secure, outsiders within range of
your wireless network will be able to use your wireless connection
without your knowledge.
IMPORTANT!
