TracPhone V7 User’s Guide
26
Chapter 3 - Configuration
Defining an RF Radiation Hazard Zone
Follow the steps below to configure an RF radiation hazard zone.
1. Determine the necessary azimuth range for the RF
hazard zone. You will need to enter the beginning and
ending azimuths that define the outer boundaries of the
zone, relative to the antenna’s forward arrow, which
should be pointing toward the bow (see Figure 3-2).
NOTE: Each RF hazard zone must span at least 5º. Therefore, be sure
to set beginning and ending azimuths at least 5º apart.
Figure 3-2 Beginning and Ending Azimuths Defining RF Radiation Hazard Zone
2. Press MENUS until the display shows
“CONFIGURATION.”
Antenna
000
180
090
270
135
225
315
Forward
015
080
RF Radiation
Hazard Zone
(Example)
Beginning
Azim
u
th
Ending
Azim
u
th
CONFIGURATION
NEXT MENU ACCEPT
