Section D – Optional Data Recording System
Quick Start Guide – Data Recording Unit
1) Record Data:
A)
When powered on, the data recorder’s LCD screen will display the “Main Menu” similar to
Figure 1,
below. Check the time and date listed.
1.
If the time needs to be corrected, see
Section 3
below.
2.
If the time is correct, insert the SD (Serial Data) card into the small slot located on
the right side of the Data Recorder until it locks.
Figure 1 – Main Menu
2) Retrieving Data:
a)
When you have finished collecting traffic data, hold any key and the display will read
“Remove SD Card”.
b)
To remove the card, press the SD card in and it will pop out.
3) Setting the Date and Time:
Figure 2
– Set Time
a)
Before inserting the SD card
, first power up as described above. Next, press “Enter” to get
to the Settings Menu,
Figure 2.
b)
Press “Enter” when the display reads “Set Time”.
c)
Using the “+” and “-” keys, set the correct Month, Day, Year, Hour, and Minutes. When
you have the correct number entered for each, press the “Enter” key to get to the next field.
Please note: Military time is used, i.e. 2:00 PM should be entered as 14:00.
