v.
Automatic intensity adjustment to ambient light conditions.
vi.
12 VDC operation, 12 VDC or 100 – 277 VAC, 50/60 Hz input.
vii.
Keyed On/Off switch.
viii.
Single cycle ON/OFF clock – standard
ix.
Automatically defaults to last settings upon power up.
13
.
OPTIONS and UPGRADE
1.
Hitch Mount
2.
Traffic Count Data Acquisition System with software
3.
Solar Power System with mounting bracket
4.
“SLOW” violator alert
5.
Red-Blue flashing bars violator alert
14.
WARRANTY
Kustom Signals warrants parts and workmanship on the LED display for (2) years. The
radar unit is warranted by the manufacturer for (2) years. On-site labor is not included.
Parts are repaired within five business days of receipt, and include ground service shipping
within the USA. Warranty does not include physical damage from misuse, acts of nature,
terrorism or vandalism. Wear and tear items such as tires are not covered. Please forward
any warranty issues to the
Shipping Address
found in
Section 16
. Please call for authorized
RMA before returning any parts.
15.
TROUBLE SHOOTING TIPS
1.
If no speed is displayed:
1.
Check battery(s) with a voltage meter to be sure they are outputting at least
12 volts.
2.
Check battery charger indicator lights. Be sure there is power to the charger
from your outlet and power out from the charger measures higher than 12
volts.
3.
Check your “Set Time” feature and be sure your clock is set properly to
display at the correct times. If in doubt, disable the set time feature.
2.
If a “NR” is displayed:
Please note the radar can be accessed via a panel on the back side of the LED
display. Use the “L” key to remove the tamper resistant screws and slide the cover
over.
1.
Check the radar gun connector to be sure of a good connection.
2.
Check the indicator light on the back of the radar unit:
•
A solid red LED indicates a vehicle traveling away from the unit is
being measured.
•
A solid Green LED indicates a vehicle traveling towards the unit is
being measured.
•
A flashing red LED indicates power but no target is being acquired.
3. If display is not showing the proper oncoming vehicles – See section 5.
