Thank you for the purchase of the
PMD 250
Pole Mount Radar Speed Display Sign. This Manual
will guide through the minor assembly, mounting, programming and use. Please read and
understand this Manual and review the checklist in
Section 1
below to be sure that you’ve received
everything you need prior to starting.
Take a moment to record the model and serial numbers below so that you have them in a safe place
for future use.
MODEL NUMBER: ______________________________
SERIAL NUMBER: ______________________________
DATE Of PURCHASE: ____________________________
OPTIONS PURCHASED:__________________________
1.
SHIPPING CHECKLIST
Item
Qty
Description
A
(1)
PMD 250
Enclosed Sign w/internal radar
B
(3)
Black ¼-20x3/4” tamper-resistant bolts
C
(1)
“YOUR SPEED” sign
D
(1)
Key for enclosure latch
E
(1)
“L” Key for signage
F
(2)
Key for “On/Off” switch
G
(-)
Mounting hardware for a 4” pole
Figure 1a Figure 1b
Section A – Installation
2
.
LOCATION SELECTION
In order to optimize your traffic calming results, there are a few simple things to keep in
mind and simple steps to follow. You’ll want a mounting location that’s on a relatively flat
stretch of road and is not too close to any stop signs, intersections, or sharp curves in the
road. A clear line-of-sight relatively free of obstructions such as large trees, fences or other
landscape features is desired. The radar unit is single-directional, so only the speed of
oncoming vehicles is displayed. If solar powered, solar panel should be mounted on the
South side of the pole and be clear of shade from trees and buildings. Any shade over the
panel will significantly reduce the effectiveness of the charging system.
