Kurzweil PC3x, Руководство по обслуживанию

Страница: 69 / 72

Troubleshooting & Maintenance
Converting the Voltage
4-19
The Fuse Holder
The fuse holder used in the PC3x can accommodate different fuse con fi gurations. In general,
two fuses are required in EU countries and for all units con fi gured for 230V regardless of
location. Only one fuse is required in the USA. Check local regulations for requirements in other
locations. Two fuses may be used in the USA if the conversion clip is removed. See the photos
and instructions that follow to remove the conversion clip.
The fuse sizes may be either 1.25” X 0.25” or 5 mm X 20 mm. For units set to 115V, use two
500mA fast blow fuses. For units set to 230V, use two 250mA fast blow fuses.
Warning : When only one fuse is used, a conversion clip must be installed in the other fuse
location.
1. The photo below shows the position of the conversion clip for a unit with only one fuse.
2. To con fi gure the fuse holder for two fuses, you must remove the clip.