5-14
Descriptions of Parameters
Setup Editor Parameters
The Controllers Menu
The Controllers menu contains parameters that deÞne the functions of the PC2Õs physical
controllers (wheels, sliders, breath, pedals, buttons, and ribbon).
Each zone of every setup has a set of independently-programmable controller parameters.
Editing a parameter in one zone of a setup affects
only
that zone; it doesnÕt affect the other zones
in the setup, nor does it affect any other setup.
The internal setup (which deÞnes numerous characteristics for every program in Internal Voices
mode and KB3 mode) also has a separate set of these same parameters. Editing a parameter in
the internal setup affects all programs, but doesnÕt affect any setups.
There are three groups of controllers listed in the Controllers menu:
¥
Continuous controllers
¥
Switch controllers
¥
Ribbon controller (a specialized continuous controller)
Each of these groups has a set of common but independently-programmable parameters. For
example, every continuous controller has a parameter called Ctrl Num; it determines which
MIDI message the controller sends. Editing the Ctrl Num parameter for one continuous
controller doesnÕt affect the value of Ctl Num for any of the other continuous controllers.
To save space, we wonÕt list every parameter for every controller. Instead, we identify the
controllers that belong to each group, then list the common parameters once for each group.
Entry Volume
Sets the volume level of the zone when you select the setup, by sending a MIDI Controller 7
message with the value you specify. You can set a value of
None
to prevent the message from
being sent when you select a setup.
Final Attac
k-V
elocity
V
alue
Keystrike Velocity
Velocity Min: 64, Max: 127
Velocity Min: 1, Max: 64
No MIDI velocity is produced when keystrike
velocity is less than 64
No MIDI velocity is produced when keystrike
velocity is greater than 64
0
127
64
64