62
3BA00044-00 • 2013-05-23 • Rev. 4
ersa DIGITAL 2000 A
6.4
Changing the Heating Element
Before changing a heating element, switch off the device at the mains switch and pull the
connecting plug of the soldering tool.
Allow the device to cool for a few minutes.
TECH TOOL
Abbildung 19
• Unscrew handle mounting screw (pos. 1/fig. 19).
• Pull off handle (pos. 2/fig. 19).
• Disconnect plug connection (pos. 4/fig. 19) between heating element
and cable.
• Replace heating head (pos. 3/fig. 19).
• Restore plug connection (pos. 4/fig. 19) between heating element and
cable.
• Push handle (pos. 2/fig. 19) onto heating head (pos.3/fig. 19).
• Screw in handle mounting screw (pos. 1/fig. 19).
CHIP TOOL –
Dismantling steps
Figure 20
Diagram of connector pin
arrangement on connection socket.
Replace heating
elements in pairs.
Slot key Order no. 3N472
Installation position of
leaf spring with short
side up.
Error Diagnosis
and Troubleshooting