54
3BA00044-00 • 2013-05-23 • Rev. 4
ersa DIGITAL 2000 A
5.4
Changing Soldering Tips
The soldering or desoldering tip must be changed when worn or when another tip form
is desired.
Important
!
Operate all soldering tools only briefly without soldering tips!
TECH TOOL
:
The soldering tip can also be changed without a tool when hot.
Figure 6
■
Loosen the soldering tip (pos. 1/fig. 6) by turning the
knurled nut (pos.
2/fig. 6)
counter-clockwise.
■
Remove the tip and place in holder or on a fire-proof support.
■
Then screw on new tip by appropriately
turning the knurled nut
clockwise.
X-TOOL
:
The desoldering tip can be changed by means of the tip holder attached to the tool
holder.
When changing the desoldering tip, proceed as described in the "Ersa
X-TOOL"
Operating Instructions (3BA00023-00).
POWER TOOL
The soldering tip can also be replaced when hot by means of flat-nosed pliers.
Figure 7
Figure 8
Functional description